How To Install Windows Xp For Free On Windows 7

Posted on

Table of Contents

Introduction

Windows

Open the Start menu, choose My Computer, and right-click your C drive. Choose Rename, type in XP, and press Enter. Insert the Windows 7 DVD into your DVD drive and restart your PC. Your PC restarts, but loads from the Windows 7 DVD.

Windows Virtual PC is a downloadable add-on to Windows 7 Professional, Ultimate, or Enterprise that allows you to run a Windows XP environments from within Windows 7. Windows XP Mode, which requires Windows Virtual PC, is a prepackaged fully activated copy of Windows XP Professional with Service Pack 3 installed. With both of these programs installed, you can then run Windows XP in Windows 7 so that you can continue to use programs that were developed for Windows XP but no longer run in Windows 7.

In order to use the Virtual PC technology your computer's CPU must have hardware virtualization support and it this hardware virtualization must be enabled. For Intel processors this support is called Intel Virtualization Technology and for AMD processors it is called AMD-V. To determine if your processor has hardware virtualization please consult the following section.

Also when reading this tutorial you will find that I use the word host often. This terms refers to the Windows 7 operating system that the Windows XP Mode installation is running upon.


How to determine if the processor supports hardware virtualization

If you have an Intel Processor then you need to do the following to determine if your processor has hardware virtualization:

First, download and install the Intel Processor Identification Utility and run it one your computer. Once the program is installed launch the program. It can be found under the Start Menu -> All Programs -> Intel(R) Processor ID Utility. Once launched you will need to accept the license agreement and then you will be at a screen similar to the following image:


Intel Processor Identification Utility

You should now click on the CPU Technologies tab and you will see a screen as shown below.


CPU Technologies Screen

Install

On this screen, look for the row labeled Intel(R) Virtualization Technology, as shown by the arrow in the image above. If it states Yes, then you can use Virtual PC and Windows XP Mode in Windows 7, and should continue to the section where we learn how to install it. If it does not say Yes, then you will not be able to use Windows XP Mode on your computer. You can now close the Intel Processor Identification Utility.

If you have an AMD Processor then you need to do the following to determine if your processor has hardware virtualization:

If you have an AMD processor then you will need to download the AMD Virtualization Technology and Microsoft Hyper-V System Compatibility Check Utility. Once downloaded, extract the files and navigate to the folder where the files are extracted. In order to run the utility in Windows 7, you will need to run it with elevated privileges. To do this, right-click on the amdvhyperv.exe file and select Run as administrator. When the program loads it will tell you whether or not your AMD processor supports Hyper-V as shown below.

If it does not support Hyper-V, then you will not be able to use Windows XP Mode in Windows 7.

Configure your bios to support hardware virtualization

If the above tests state that your processor does not support hardware virtualization, it may be you need to enable this feature your motherboard's BIOS. As motherboards have different methods of entering the bios and configuring it, giving you step-by-step instructions is impossible. Typically, though, to enter your bios you will boot your computer and then look for a prompt asking if you would like to enter setup or configure your bios and then stating what key you need to press on your computer in order to do so. Typically these keys are F1, F2, DELETE, F10, F11, or F12. I suggest that you turn off computer and then start it up before attempting to access the BIOS, as otherwise the screen may not always show. On certain machines, you may also see a computer or motherboard brand logo that makes it so you cannot see the prompt to enter the BIOS. If you see a large logo covering the screen, simply press the ESC key on your keyboard in order to see your BIOS setup instructions.

Once in the BIOS, you will need to search for virtualization settings and make sure they are enabled. As each brand or manufacturer of computers and motherboards, or even models of the same brand, may have different locations as to where this setting is located in the BIOS, you will need to search through the settings till you find it. Look for the settings for Virtualization, AMD-V, or Virtual Machine and make sure it is enabled. Once this is done, you can try the above tests again, and if they now say you support virtualization you can continue with the rest of the tutorial.

Download and install Virtual PC and Windows XP Mode for Windows 7

Now that Virtualization is enabled on your computer, we need to download Windows Virtual PC and Windows XP Mode. To do this, visit the Windows Virtual PC Download page. Once there, scroll down till you see Step 1 and select the type of Windows 7 installed and your language. Then click on the Download Windows Virtual PC RC and the Windows XP Mode RC buttons to download each file.

Once the files are downloaded, you should install the Windows Virtual PC Beta first. This file is the smaller of the two, currently at 6.64 MB, is named Windows6.1-KB958559-x86.msu for 32 bit Windows or Windows6.1-KB958559-x64.msu for 64 bit Windows. When you double-click on the file, it will scan your computer for a certain update, and if not found, will prompt you to download the KB958559 update as shown below.


Install the KB958559 Windows 7 update

You should click on the Yes key to allow this update to be installed. When the update has finished installing, you will be at the license screen. /unreal-engine-4-offline-installer-free-download/. Click on the I accept button to finish the installation of the program. When it has finished installing, it will prompt you to reboot your computer. Please allow it to do so.

When you are back at your desktop, you should now double-click on the Windows XP Mode Beta installation file, which is named WindowsXPMode_en-us.exe. When the installation program opens, follow the prompt to install the program onto your computer. The installation may take a while as the package is over 400MB, so please be patient. While installing, Windows will display a User Account Control prompt asking if you wish to have this software installed on the computer. At this prompt, click on the Yes button to continue. After the Windows XP Mode software has been installed, press the Finish button and Windows XP Mode will start. Please continue to the next section to learn how to configure Windows XP Mode when it runs for the first time.

Starting Windows XP Mode for the first time

When you start Windows XP Mode for the first you will need to first accept the license agreement and then press the Next button. You will now be at a screen, as shown below, where you are asked to input the password for the user that XP Mode programs will run under.


XP Mode Credentials

Create a password and enter it into the two password fields. If you do not want to enter the password every time you start Windows XP Mode, then put a checkmark in the Remember credentials checkbox. When done, click on the Next button.

You will now be asked if you would like to enable Automatic Updates. You should put a checkmark in the Help protect my computer by turning on Automatic Updates and then click on the Start Setup button. Windows Virtual PC will now setup Windows XP Mode for its first time use. This may take a while, so please be patient.


Windows XP Mode being setup for its first use

When the setup has been completed you will now be in Windows XP Mode and will be presented with a Windows XP Professional desktop.


Windows XP Mode Desktop

While Windows XP Mode is running, the Virtual PC program will automatically integrate all of your host computer's resources into Windows XP Mode so that you can use them. This includes your your computer's DVD/CD drives, hard drives, sound card, printers, and USB devices.

To close Windows XP Mode you can click on the Actions menu and select Close to hibernate your session and close the window. If you would like to actually shutdown the Windows XP Mode, you need to click on the Ctrl+Alt+Del menu and then click on the Shut down button on the screen that pops up.

How To Install Windows Xp For Free On Windows 7 Product

To star Windows XP Mode again you simply click on the Start Menu, select All Programs, scroll down to Windows Virtual PC, and then select Windows XP Mode.

How to install and launch Windows XP Mode applications

To install applications in Windows XP Mode, you would install them like they usually do. You can either download the programs over the network or the web and install them directly from the Windows XP Mode hard drives or you can install them via your host's shared resources like the CD/DVD drives attached to your host computer. The only difference is that the applications will be running in a virtual Windows XP environment and therefore will run even if they are not compatible with Windows 7. This will allow you to install any legacy applications that you need to continue to have available.

How To Install Windows Xp For Free On Windows 7 Free

A feature of Windows XP Mode is that any application you install that uses Windows Installer will also have a shortcut automatically added to the a Windows XP Mode Applications folder in your Windows 7 Start Menu. If the program you install does not appear in the host's Windows XP Mode Applications folder, you can manually make a shortcut appear by creating a shortcut to the program in the C:documents and settingsAll UsersStart MenuPrograms folder on your Windows XP Mode installation. You then need to log off in Windows XP Mode and the program will now appear in the Windows XP Mode Applications folder on your host computer.

When you launch these programs from the Start Menu, they will appear as a normal program running on your computer rather than one running in a virtual desktop. In fact, when you launch one of these applications you will never see the Windows XP Mode desktop and the application will be running directly on your normal desktop. To launch Windows XP Mode applications you would need to navigate via the Start Menu to All Programs, scroll down to Windows Virtual PC, and then Windows XP Mode Applications. Under that sub folder you will see a list of applications that you can directly launch from within Windows 7.

When running XP Mode Applications directly from the desktop, it is important to understand that Windows XP Mode is started, but is being run behind the scenes so that the actual desktop is hidden. The running XP Mode Applications, though, still use the data and drives that are normally on the Windows XP Mode desktop. That means any XP Mode programs will be opening the XP Mode drives, and not the local drives of your host Windows 7 operating system unless they are shared.

When you are done running an XP Mode application, you simply close it like normal. This will put the Windows XP Mode virtual pc into a hibernating state.

It is also important to note that when starting XP Mode applications, they will start much faster if XP Mode is a hibernating state rather than shutdown. Therefore, if you routinely use XP Mode applications, I suggest you do not shut down your XP Mode when not using it and instead leave it hibernating.

Change integration features and settings

When running XP Mode it is possible to change the hardware and data that is automatically integrated into the virtual pc. To change these settings, when in the XP Mode desktop click on the Tools menu and then select Settings... You will now be at the virtual pc settings screen and should click on the Integration Features category. From here you can specify what hardware and features you would like to integrate, or share, with your XP Mode desktop.

These features are:

  • Audio - This should remain unchecked so that you have better performance. It should be noted that even with this unchecked, any sound from the XP Mode desktop will still play through your host's audio card.
  • Clipboard - If this is enabled then you will be able to copy and paste between XP Mode and your normal desktop.
  • Printer - Shares your host's printer with XP Mode.
  • Smart Cards - Allows XP Mode to access the host's smart cards.
  • Drives - Allows XP Mode to access the host's drives, which include hard drives, CD/DVD drives, and removable media.

Any changes you make to the settings above will be persistent each time you start XP Mode. On the other hand, if you need to disable the integration for a particular session you can click on the Tools menu and then select Disable Integration Features. This will make it so that you do not have access to any of the host's resources. To enable access to these resources, simply click on the Enable Integration Features option in the Tools menu.

Change XP Mode Virtual Machine Settings

If you find that XP Mode is not running as fast as you would like, or you want to add more features, you need to tweak some settings in your Virtual PC settings for XP Mode. In order to change these settings you must first shut down XP Mode so that it is not in a hibernating state. To do this, click on the Ctrl+Alt+Del menu and then click the Shut down button on the screen that pops up.

When XP Mode has shut down, click on the Start Menu, select All Programs, scroll down to Windows Virtual PC, and then select the Windows Virtual PC icon. You should now see a list of your Virtual PCs, including Windows XP Mode. Right-click on Windows XP Mode and then select Settings. Now that Windows XP Mode is shut down, you can change the settings for your virtual machine.

Settings that you may want to consider changing to increase performance and reliability are:

  • Memory - If you find that your applications are running slowly, then you may want to bump this up so that your applications have access to more system memory.
  • Hard Disks - You are able to add 2 more hard disks to your Windows XP Mode. So if you need to add another drive to your Windows XP Mode, you can do so here. This will allow you to create a second disk on another physical drive in your computer to enhance performance.
  • Undo Disks - Undo disks allow you to create a base image of your Windows XP Mode installation and then save all changes into an undo disk. Then if you ever need to start over from your base image, you just go back into settings and discard the changes in your undo disk. The next time you start Windows XP Mode, you will be back at the base setup with all of the changes you have made discarded. I suggest that everyone turn this option on as it only increases the safety of your Windows XP Mode installation.

Once you have finished making your changes, simply click on the OK button to save the changes. When you next start Windows XP Mode, these settings will now be in effect.

Conclusion

Without a doubt, Windows XP Mode is a significant feature for Windows 7 as XP Mode allows you to run programs that are no longer compatible with Windows 7. Whether these are business applications or older games, Microsoft offering a fully licensed Windows XP Professional to use on your Windows 7 desktop is a an excellent tool. For more discussion on how to use, why to use, and supporting Windows XP Mode, please see our Windows 7 forum.

Microsoft is making good their promise to remove mandatory product key input during the installation or upgrading process of Windows XP operating system, in a new Windows Product Activation (WPA) process that similar to what implements in Windows Vista. However, only integrated Windows XP with Service Pack retail install or OEM CD can bypass the step to enter product key. Windows XP SP3 installation or setup CD/DVD for corporate customers with volume licensing agreement still require a valid and legitimate volume license product key (VLK) to be entered, as tested and reported by Tip and Trick previously.
When installing Windows XP with Service Pack 3 integrated setup CD or DVD for retail or OEM channel (clean install from fresh state or upgrade), the installation process will still prompt for a 25-character product key as appeared on the yellow sticker on the back of Windows folder to be entered. However, user can leave the product key field blank, and simply click Next button to skip supplying a product key during installation. As similar to Windows Vista, installing Windows XP SP3 without a product key will have system offers the user 30-day activation grace period, and entitles user to a 30 days evaluation or trial period to try out the OS.


Windows XP Setup screen during entering product key phase, which now says “Entering your product key is optional but strongly recommended to help avoid complications during activation.”


If the user click on next without filling in the 25-character product key (leaving the product key field or the 5 boxes blank), an “Error” dialog saying “Entry of a product key will be required later for continued use of Windows. If you choose not to enter the product key now, you might need to reinstall Windows later and potentially lose files and information, or you might need to purchase another version of Windows. We strongly recommend that you enter your product key now. Do you want to enter your product key now?” It’s probably a scare tactic, just click “No” to skip and bypass the product key step.

It’s unclear why Microsoft decides to leave the Volume Licensing media (commonly known as VL or VOL) untouched, since it makes no difference to still require a product key during installation. The VOL editions of Windows XP is the main crack method used by pirates to counterfeit Windows XP OS. It’s commonly used with leaked or stolen VLK which once entered, Windows skips the activation procedure altogether, guarantee sure success to activate Windows XP (of course, the crack won’t work when validation comes into picture.) Thus, it’s believed that Microsoft probably fears of annoying the powerful big corporate customers who prefer fast and easy deployment as associated with Windows XP so far.


Menu item in Start Menu to activate Windows XP SP3


A activation key with days left for activation tooltip also displays in system tray (notification area).


Windows XP SP3 activation wizard will ask for product key to be entered before activation is done online.

Related Posts

Recent Articles

Tags