How To Install A Salt Free Water Softener

Posted on
  1. How To Install A Salt Free Water Softener
  2. Is There A Salt Free Water Softener

The Poly Salt-Free Softener is a triple action, modernized water softener that combines fuses all the three roles of the standard softening components. As a homeowner, you will need different filters, softeners, and filtration systems to perform individual purposes. But with Poly Salt-Free Water Softener, you have all three tasks performed in a single unit.

In the softening unit, phosphate media dissolves into the water as it passes through it. The phosphate media works by binding harmful chemicals like magnesium and calcium and preventing them from forming limescale deposits.

These water softeners also utilize salt to clean the water softener and regenerate the resin bed. During regeneration, positively charged sodium ions replace the hard water minerals trapped in the resin bed, and the hard water concentrate is flushed down the drain. Salt-free water softeners, on the other hand, do not remove hard water minerals. Not only do we offer hard water solutions without salt, but the NuvoH2O is also easy to install and deliver refreshing soft water to your home in just about sixty minutes. When you install whole home water softeners with NuvoH2O, you can say goodbye to scaling and hello to fresh, clean, soft water — all with the power of citrus.

The softener has a 50-micron filter that can be recycled and easily removed. Additionally, the softener has an added advantage of BPA- free plastic that enhances water softening without side effects. So, let’s start the Poly Salt-Free Water Softener Review.

Features of Poly Salt-Free Water Softener

  1. See the installation guide of water softeners here How does a salt-free water softener work: Salt-free water softeners are water conditioners in actual. They do not soften the water but break the hard minerals in a way that they can pass easily from plumbing, through faucets, into the drain.
  2. These water softeners also utilize salt to clean the water softener and regenerate the resin bed. During regeneration, positively charged sodium ions replace the hard water minerals trapped in the resin bed, and the hard water concentrate is flushed down the drain. Salt-free water softeners, on the other hand, do not remove hard water minerals.

Poly Salt-Free Water Softener comes with the following features:

  • A user manual that instructs on how to install and maintain the unit.
  • A 50- micron reusable filter that is reusable and easy to disassemble.
  • Included wall-mounting bracket and a housing wrench.
  • Permanently installed a 25-micro filter that is stainless steel and easily cleaned.
  • A durable high impact clear poly housing.
  • It is designed with a 30 GPM flow rate to ensure a maintained pressure.
  • An extra free polyphosphate tank.
  • A pre-filled polyphosphate cartridge.


Poly Salt-Free Water Softener works on the same necessary softening process as the standard softeners, although no salt is used. The phosphate minerals inside the system hold the calcium and magnesium suspended inside it. This prevents the hard water causing minerals from depositing limescale residues in home appliances. The softening process begins with incoming water going through the Hard Water Bullets scale control core that breaks down the calcium and magnesium minerals into aragonite crystals.

Water moves through the polyphosphate cartridge containing both phosphate crystals and a 50-micron filter screen from the control core. The phosphate crystals break down the calcium and magnesium to form crystals. A 50-micron filter screen filters the water’s impurities as it moves to the unit’s conditioning core. The polyphosphate finally softens water by suspending the calcium and magnesium crystals and prevents them from proceeding with water to your home. Although the system is salt-free, it is considered a softener and not a conditioner. This is simply due to its ability to hold the calcium and magnesium after breaking them into aragonite crystals. Some of the advantages of the system being salt-free include;

  • There is no water wastage during the softening process.
  • You will not worry about topping up the tank with salt regularly as it is done in other softening units.
  • The phosphate minerals are estimated to last for about ten months before you think of changing them.
  • It is cheaper and energy saving since it does not need to regenerate or electricity to run.
  • It also offers protection to home appliances from the effects of hard water, cutting down your cleaning expenses, and increasing their lifespan.


Poly Salt-Free Water Softener unit comes when it is pre-assembled with the polyphosphate beads inside, so it becomes easy for you to install at a place of your choice along the main water pipe. For efficient drainage, it is recommended to install the system vertically. In some cases, professional plumbers are hired, who can do the installation in 1 or 2 hours. However, the unit comes with its user manual, which offers guidance on installation; therefore, it’s preferred to be installed by the user. The maintenance costs are cut down because the only important factors to give attention to are the unit’s ability to clean and change the phosphates.

The 50-micron filter is reusable, meaning you only need to take it out and clean after every month, depending on how frequently you use it. Regular cleaning prevents possible clogging and maintains its high performance. You are also advised to do a 6-months regular checkup of polyphosphate beads, even though they are estimated to last between 10 to 12 months. However, the replacement period for the beads depends on the average use. If you exceed their average usage means you will need to replace them before 12 months are over.

Gen 5 Polt Salt Free Water Softener Overview Service

Watch this video on YouTube

FAQs About Poly 3-in-1 Water Softener

  1. Can I buy commercial high flow salt-free softeners?

Ans: Yes. There are commercial high flow salt-less softeners that treat flows start from 35gpm per unit. For instance, the largest single-unit can treat up to 500 gallons in a minute.

  1. Can I install a saltless water softener system on the hot water circulating pump?

Ans: It is not recommendable to install the system on hot water because the harsh chemicals will build up in the water and cause highly concentrated deposits. You can only install on cold water pipe leading to the hot water pump.


Do salt-free water softeners really work

If you are looking for the best water softener, then you better choose Poly Salt-Free Water Softener. This softening unit is of the new class and is designed to do all the three functions of the other standard units. You don’t need to worry about buying different systems for filtering, softening, and conditioning water since the unit has all that it takes to offer triple services to you.

The most outstanding feature is that the unit comes fully loaded with polyphosphates beads and a permanent 25-micron filter, and you don’t need to buy them. Maintenance costs of Poly Salt-Free Softener are reasonably low as you are only required to clean the system regularly. Not forgetting that the unit is suitable for people with low sodium requirements.

Water softeners are the real hero of your home, especially if you are worried about hard water. Within minutes, they convert your hard water into soft water, and thereby, you will experience soft, smooth hair and skin. Not only this, but it will also enhance the life of your appliances such as washing machines, dishwashers, coffee makers, etc. Stick to this post to know about how to install a water softener system.

Suppose you haven’t installed a water softener yet despite having hard water in your home. In that case, seriously, you are wasting your hard-earned money in changing and maintaining plumbing and different appliances.

Water softeners are really very easy and simple to install. I am sure you can do it easily by yourself; even you won’t need any labor for it. Just buy a suitable water softener for your home and installed it. It won’t require too much time.

But if you are still reluctant about installing a water softener on your own, then this article will surely help you.

So today, you will get to know that how you can easily install a water softener in your home.

How To Install A Salt Free Water Softener

Is there a salt free water softener

Here you go!


  • Installing a Water Softener- Is It Really Easy ?:
  • Wrapping Up!

Installing a Water Softener- Is It Really Easy ?:

Installing a water softener is quite an interesting and easy task, but let me add-in, it all depends upon the type of water softener you are installing.

Generally speaking, there are four main types of water softeners:

  • Salt-based water softening system
  • Salt-free water softening system
  • Magnetic descaler
  • Reverse osmosis water softener
Magnetic descaler water softeners are the easiest water softeners that can be installed very easily.

Factor that affect Final price for your DIY water Softener is How Easy you can Install it.
If pre-plumbing for a water softener is located near, you can save time and money.

Is There A Salt Free Water Softener

Whereas, reverse osmosis water softeners are quite hard to install. If you have prior experience installing such water softeners, you can take the risk of installing it on your own.

As far as the salt-based and salt-free water softeners are concerned, their difficulty level is moderate. The reason they are a bit tricky to install is because of the fact that you need to connect it through the pipelines, especially when you are installing a whole house water filtration plant.

If you are a DIY-er and have dealt with cutting and soldering pipes, you can only handle the installation of salt-based and salt-free water softeners. Otherwise, it’s better to hire a professional for this task. You also may require a water softener installation kit.

Installing a water softener in a Soft Water Loop is the recommended method of installation. A soft water loop is simply a place in the waterline, before the water heater, where all water that is to be softened has to pass through.

Right Place for Setting up a Water Softener?

What should be the right place for installing a water softener? Or where to install a water softener.

Ideally, it should be installed at a place:

  • Where the water enters your house
  • Which is near to the heater
  • Which is near to drain line
  • Which has enough space for servicing.
  • Where there is no direct sunlight

Most people preferred to install it in the basement, garage, or utility rooms. In these places, you can easily do cleaning and maintaining the task of your water softener. In addition to this, such places are usually hidden; your visitors won’t even guess that you have installed water softeners until or unless you show them by yourself.

Keep in mind, that we do not install water softeners in an area where freezing may occur. This will cause permanent damage to your softening unit.

These rules of installing water softeners are applied to three types of water softeners only except magnetic descaler.

When it comes to setting up a magnetic descaler, you don’t have to worry about the points mentioned above. Magnetic descaler can be easily installed anywhere, on any pipeline.

What you have to keep in mind is, install them on your main water line where the water enters your home.

How to hook up a water softener

Water Softener System Installation is easy to understand If you have a Good Plumbing System. You can hook up a water softener by yourself easily if you have little technical knowledge. Where to install a water softener – The ideal place to install a water softener is on the ground level, near to point of entry of water in the house.


The earlier on the pipeline, you will install a water softener, safer your pipes. As hard water will get less time to spend in pipelines because as soon as it will enter in your home’s pipeline, it will be converted into soft water. Installing a water softener is pretty easy as Discussed below.

How to Install a Water Softener?

Every type of water softener requires different tools and tricks for installation. We will cover each type and will tell you how you can easily set up a water softener. How to install a water softener with or without loop, a water softener loop installation costs $600 to $2,000 on average. Soft water loop costs depend on where the loop wants to be and where the present plumbing is located. A loop is not at all times required, and some softeners have a softener loop and bypass built-in. Also can be installed with well.

There are numerous ways to complete the drain requirements. Often, the drain lines are run to a floor drain, but you can also outspread the drain line into the standpipe that also drains a washing machine, or into a utility sink or sump pit. you can use the same method to install whirlpool water softener also.


Step 1: Clean the area where you want to install a salt-based water softener.

Step 2: Shut off the water supply line.

Step3: With the help of a pipe cutter, cut the mainline.

Step 4: Install an elbow fitting in the line.

Step 5: Cut and install the pipes that will lead to the bypass valve.

Step 6: Using compression fittings, attach the pipe to the softening unit.

Step 7: Clamp the drain hose to the unit (to prevent back siphoning of the water, ensure the end of the hose should be at least two inches above the drain hole).

Step 8: Using the manufacturer’s instructions, connect the overflow tube to the brine tank (ensure that the overflow’s discharge should be positioned lower than the overflow fitting).

Step 9: Rotate the valve to the bypass position and flush water through it.

Step 10: Turn the valve to the backwash position and plug in the unit.

Your salt-based water softener is installed and ready to be used. Use the manufacturers’ manual and instruction to set up the regeneration schedule.


Step 1: Clean the area where you want to install the salt-free water softener and arrange the components according to your need.

Step 2: Shut off the main water supply line.

Step 3: Using a pipe cutter, cut the pipe of the cold water supply line.

Step 4: Connect a shut-off valve to the pipe you have cut by gluing it to the PVC or by soldering it to copper.

Step 5: After the shut-off valve, using compression fitting, install a carbon pre-filter.

Step 6: After the pre-filter, install a second shut-off valve.

Step 7: Attach the downflow outlet to the cold water supply line. This will allow the water to flow through the system and back through the hose.

Step 8: Turn off both shut-off valves and turn on the main water valve

Step 9: Gradually turn on the shut-off valves one by one and check for the leakage. And that’s it. You are done!

A salt-free water softener is installed, and now you can enjoy soft and pure water from all taps of your home.


Step 1: Clean the pipe on which you want to install it.

Step 2: Using the manufacturer’s instructions open up the magnet box

Step 3: Fit the magnetic box around the pipe keeping in mind the direction of the water.

Step 4: Close the box around the pipe and secure and fix it with the help of the screws provided.

Magnetic descalers are really very easy to install. The best part is, they do not require any special tool for installing. They can be installed anywhere on the pipe.


Most of the reverse osmosis water softeners are installed under sink to deliver purified water through its own tap. Let me tell you, installing a reverse osmosis water-softening unit is a bit tricky task. I would recommend hiring a professional for it, especially if you are installing it for the first time.

Step 1: Shut of the water flow of the sink.

Step 2: Turn on the taps to drain the remaining water in the lines.

Step 3: Loosen your cold water feed from the valve.

Step 4: Install the saddle valve along with the filter.

Step 5: Join the one end of the water filter supply to the saddle valve.

Step 6: Connect the supply lines and waste lines to the faucet of the system.

Step 7: Connect the faucet to the sink.

Step 8: Install the drain line adapter.

Step 9: Place the storage tank and connect the supply lines.

Step 10: Slowly turn on the faucet and check the leakage.

Now your RO water softening unit is installed and ready to be used. Read the provided user manual for further guidance.

Wrapping Up!

Different types of water softeners require different tools and tricks for installing. We have covered every step that you can follow while installing a particular type of water softener. You can simply do a water softener installation by following the above methods.

Water softeners are truly a life-saver for you, especially when you are facing great trouble in dealing with hard water.

Though hard water is not risky for your health, it may cause permanent damage to your plumbing and appliances. You can say, in the longer run, it increases your expenses.

But if you installed a water softener in your home, you can get rid of all the problems you face because of hard water.

So installed a water softener in your home and enjoy soft and pure water anytime and from any tap.

Frequently Asked Questions:

Can I install a water softener myself?

yes, you can install a water softener by yourself and save extra costs of money on a plumber. You can replace the water softener in 1 hour.

How long does it take to install a water softener?

Plumbers have the best practices and knowledge about water softener installation, so they install within three hours.

Where is the best place to install a water softener?

The ideal place to install a water softener is on the ground level, near to point of entry of water in the house.

How much does it cost to install a water softener?

Mostly, water softener installation can range anywhere from as low as $400$3500.

Can I put my water softener outside?

Yes, you can install your water softeners outside.

How to install a water softener in pre-plumbed house?

The best way of softening water to consider is to soften only the ‘Functional’ water, that being the hot water. It is the hot water line that results in the precipitation of scale on the fittings and taps. Very little is deposited by the cold water. So, you can cut down on the cost of softening by only treating the water which you will heat.

How to install water softener drain line?

Put a stopper in the sink. And then you have a flood the next morning so you just have to make sure you watch for that you can also drain it into a sump hole you can drain the to a floor drain.

Related Posts: